Re: Warn Hub Bolts


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Kevin in Ohio on Monday, September 29, 2008 at 08:38:09 :

In Reply to: Warn Hub Bolts posted by rickinMA on Sunday, September 28, 2008 at 17:38:49 :

I agree with others not to use overly hard bolts. Let the "break" link do it's job and don't overtighten them.
Russ Roth brings up a good point too about plowing being potenially harder than off roading, if you get on a clear section of pavement that won't allow the wheels to slip during a turn. Remember, you have the added weight of the plow on the front.
Pauls bend over tab suggestion is the way I'd go but you can also drill the heads and safety wire them. If you have access to an EDM drill even better ;) Kevin



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com