|
|
Posted by Keith in Washington on Tuesday, September 16, 2008 at 00:25:35 :
In Reply to: Re: Drag link Removal posted by Tim Holloway on Monday, September 15, 2008 at 23:12:01 :
Do not pry on the wire clip!!!! You will bend it. They come out really easy. Take a small socket and remove the grease zert first. Once the zert is out the wire clip slides to one side and you rotate it a little as you slide it. The one end comes out then slide it the other way and the other end comes out. The grease zert is there to hold the wire clip in as well as for greasing the ball joints.
Follow Ups: