Posted by Gil Huguley on August 18, 2000 at 14:40:11:
The fan drive pulley seems to be too far back since I got the engine back from the machine shop. (Or--the water pump and generator pulleys seem to be too far forward--by about 1/4 inch. Since no work was done on the front of the crank, I am at a loss to explain the problem. There is a spacer on the water pump pulley, which if I install as the book shows behind the pulley, only makes the problem worse. I now have it on the front side of the WP pulley. This may be related to my previous post about the fan belt rubbing against the radiator support. (Yeah, I wish I had taken more pictures last year when I disassembled it al).
Thanks, Gil