|
|
Posted by Paul ( in NY) on Monday, August 11, 2008 at 21:44:37 :
In Reply to: power steering rebuild parts posted by Burnt out busted and broken Bruce on Monday, August 11, 2008 at 19:40:34 :
Look at the picture. You can see the PS tank to the left of the MC. I am using the round can PS pump with only one return line. NAPA sells replacement PS tanks that have a feed and return line. Put a Tee in the return line from the tank to the PS pump suction. The Hydroboost return attaches to the TEE. Keep the tee close to the Tank. The Hydroboost return goes to the TEE single barb fitting...NOT to one of the barbs opposite each other on the Tee. If you dont hook it up to the single Barb, the hydroboost will not dump properly after brakes are applied and released. I bought my new replacement tank at NAPA for $15.95. I apologize, but I did not write down the NAPA part Number. But they had 5 different styles of PS tanks. Pick the one that best fits your mounting.
Paul