|
|
Posted by Eric B. on Friday, July 18, 2008 at 09:01:27 :
In Reply to: Re:No, No, No! posted by dave on Friday, July 18, 2008 at 08:47:47 :
Dave,
Sorry I misunderstood what you were trying to say.
I have talked to a couple guys who have used that bed on their WM300, and they did cut off a little bit of the front of the bed.
As for the lower section by the running board, yes I knew you had to cut that off, and re-bend the lip in the right place.
But then if you do leave the bed alone, you will need to order bed wood for a 1966 D200 or the like. That is unless you make it yourself, in which case you can use the pattern from the bed you used.
Eric