Re: stuck m13 warn hub


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Doc Dave on Tuesday, July 08, 2008 at 07:11:56 :

In Reply to: stuck m13 warn hub posted by dave on Monday, July 07, 2008 at 23:28:07 :

I would like to add, in addition to what Paul covers very well, something I learned recently.
DO NOT not discard the steel roller pins, even if they are pitted, etc.
It is impossible to find new replacements now for these pins.
Dress these pins with some fine abrasive paper if needed to take off burrs, etc.
I reassembled my hub with a light coating of synthetic grease after cleaning.
I also buffed the exterior with white rouge, which helped a lot with the hubs overall appearance.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com