|
|
Posted by Paul ( in NY) on Tuesday, July 08, 2008 at 00:00:07 :
In Reply to: stuck m13 warn hub posted by dave on Monday, July 07, 2008 at 23:28:07 :
I have the Warn Hub service/maintenance section from the Dodge Truck (Power Wagon) shop manual on my Image event. These hubs are very easy to disassemble and clean. If you find broken parts, they may be a problem to find. When disassembling remember the allen screw that holds the selector in place is STAKED. You will have to remove the stake for the allen screw to back out. Cut and paste this link to go to the album
http://imageevent.com/moosecreekmaple/warnhubs
Paul