|
|
Posted by Mark on Friday, June 20, 2008 at 15:54:20 :
I have a 1948 B1PW with a stock brake system. I was having problems with the brakes. I would get in the truck and step on the brake pedal and it would grab about 3/4 of the way up which is fine and I had excellent brakes. After 30 miles of driving country roads with a half dozen stops and some hills the pedal was hard right at the top and I noticed the brake lights were also staying on. The brakes still operated fine but they were dragging a little. So I bought a new master cylinder, bench bled it and intalled it. I bled the lines and I had good pedal 3/4 from the top again. I just took it for a ride and I'm having the same problem. The pedal grabs at the top, the lights are stuck on and I can feel it dragging. What is keeping the pressure on the system or what else can I replace?
Follow Ups: