Re: Use that 1/8" stroke like a hammer.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Tom Petroff (IL) on Thursday, May 15, 2008 at 07:55:44 :

In Reply to: Re: Use that 1/8" stroke like a hammer. posted by Chuck Lawrence on Thursday, May 15, 2008 at 07:30:12 :

The snap ring holds the inner bearing and seal in. It should come out with the hub.
Besure you have Both outer nuts removed along with the nut locking washer.
Then rock the hub up and down and to the side to see if you can get the outer bearing cone to come out.Once it comes out you should be able to rock the hub more and get the whole thing off.
Then turn over and remove the snap ring and drive the seal; and inner bearing out.
Sometimes tapping on the outer bearing and picking it out will help.
One of those bearings are stuck on the spindle.
TGP



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com