Posted by Todd Wilson on Saturday, April 26, 2008 at 14:11:13 :
In Reply to: Re: Door repair posted by Terry on Saturday, April 26, 2008 at 13:40:05 :
From service manual
#1
Remove inside door handles,trim panel,front lower glass run and lock cylinder if righthand door.
#2
Remove outside door handle and screws and pull handle out.
#3
remove latch plate screws front edge of door.
#4
Remove the screws which hold the remote control bracket to door panel.
#5 (Sounds like you are here)
Slide the latch down the door to the lower spotweld of the rear lower glass run channel.Then lift the remote control strap to an upright position and tun the strap and latch in a counterclockwise direction on left door clockwise on right door working it out between the inside door panel and the glass run channel.The assembly may then be withdrawn through the large opening in the inside door panel.
Todd
Follow Ups: