Two tabs on the on end, 2 screws on the other.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chris Case @ San Diego on Wednesday, April 16, 2008 at 10:13:00 :

In Reply to: Thanks- and a couple of more questions. posted by Galen on Wednesday, April 16, 2008 at 07:57:54 :

That is what the two holes in one end of my template are for. You'll need a pair of the spring-clip-nuts and a pair of short sheet metal screws.

I used a modern light switch in my dash. But now that I think about it, the dome circuit in modern light switches is a ground circuit- may not work with the light-mounted switch. I think me achy body may have problems twisting around to reach to activate the dome light switch. Oh well.

Hmmm, maybe I'll put in door switches in the ground side of the circuit. Pimp My Ride?

Ammeter sound good, but a fused circuit is better. Maybe something on your light switch works?

Maybe I'll saw the hole with a cut off wheel in my die grinder? Stinky, since I vinyl covered my head liner.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com