Posted by Vaughn on July 25, 2000 at 21:05:37:
In Reply to: overdrive posted by Angie on July 25, 2000 at 12:38:34:
Hi Angie,
Congradulations and welcome to the world of PW's.
No direct boltup that I'm aware of. Advanced Adaptors use to make one years ago, but no longer.
GEAR VENDORS OVERDRIVE (0.78:1 RATIO)
Bolts up to the transfer case;
Requires shortening driveline by 14”;
Requires two piece rear output bearing retainer from an (NP205);
Final ratio is .78:1, 4.55.
$2500.00 + installation if you don't do it yourself
ALTERNATIVE:
Install 4.89 ring and pinion gears - $12-1400.00 for both axles gears installed in third members or pumpkins. You'll have to take the third members out/in yourself or pay someone. Gears available from Veterans Vehicles
Good Luck!