|
|
Posted by john copeman ontario can. on Tuesday, March 25, 2008 at 16:52:49 :
In Reply to: Re: turn signal wiring posted by Bruce B (in ND) on Tuesday, March 25, 2008 at 06:23:35 :
a little tip when tracing out a short and if you are blowing fuses >Take a cheap two prong flasher and put conecters on >and two wires for one for each prong and at the end of each wire you put on algator clips>then place the clips on the fuse holder .one clip on one side one on the other instead of a fuse >the flasher will click when there is short >you will have power in your circut to test and you wont be changing fuses like your shorts after 25 cent draft night> keep your fire extinguisher handy J