|
|
Posted by Kaegi on Friday, February 29, 2008 at 16:07:37 :
In Reply to: 1963 d-300 dually dana 70 posted by michael lisle on Friday, February 29, 2008 at 15:18:44 :
the gear oil is normal, they did not have outer seals and the bearings are lubed by the diff oil. On the nut I use a screw driver and a hammer. it does not cut into the nut like a chisel does. When re assembling put some grease on the bearings to avoid wear while they wait for gear oil to arrive from the diff. and check gear oil level in diff when done.