Re: front wheel drums


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by bill in pa on Thursday, January 31, 2008 at 22:37:01 :

In Reply to: front wheel drums posted by Mark on Thursday, January 31, 2008 at 07:56:22 :

Do you still have the hub spindle nuts on and just trying to get the drum off? If thats the case and you have the three screws out,does the drum move or wiggle seperate from the center hub? If not, there is a 4th hole on the drum, not a thru hole only about 1/4" deep. It's either 5/16 or 3/8 threads,screw a bolt into that hole by hand make sure it starts then use a impact wrench.that put's pressure between the drum and hub to seperate them. Had to do that to mine,drums were froze to the spindle made a heck of a bang when came loose.. If the spindle nuts are off and the spindle/drum combo still dont come off the need to back shoes way off. hope this works..hope my advise is correct bill



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com