|
|
Posted by Chriscase @ San Diego on Tuesday, January 29, 2008 at 16:49:34 :
In Reply to: Re: Linkage, etc... posted by John R. Dunn on Tuesday, January 29, 2008 at 12:22:29 :
It don't matter which way the carb is twisted. It's just a matter of 'twisting' that last pushrod in the linkage. Maybe it works in a different hole in the carb lever? but I know that some applications twist the carb 90 with the wedge adapter, but they all use the same 'round the back' linkage. On the same manifolds.
I think.
My FFPW has looong studs directly into the manifold, for and aft. If your 1/2t manifold has holes left/right, then a 90degree twist adapter would align it with the usual parameters.
Follow Ups: