|
|
Posted by Kaegi on Thursday, January 24, 2008 at 00:40:44 :
In Reply to: carb linkage posted by mikeLIny on Wednesday, January 23, 2008 at 20:06:22 :
they lengths of the set ups tend to vary over the years. you need to measure from the hole on the carb arm to the hole on the pivot arm that bolts to the intake. some years had adjustabel and others had fixed. if you do an ebay search for "Dodge Plymouth throttle linkage" you will see NOS boxes of various linkage set ups all for 6 cylinder mopars (chrysler too). just make sure you get one that has the correct length you need. I have done this 2 times in the last year and it worked out great. sellers will usually gladly measure the pieces for you.
Follow Ups: