Master Cylinder fittings.

Posted by Adam on Monday, December 31, 2007 at 15:33:42 :

I am doing the Master Cylinder upgrade with the recommended master cylinder (1 5/16" bore)and I found that my NAPA Master Cylinder has two different size fittings but the same size ports (probably to insure the correct line went to the correct port). The small front reservoir requires a 9/16 X 18 tpi fitting and the large rear reservoir requires a 1/2 X 20 tpi fitting. I found the fittings at Fedhill brakes.com. The 9/16 X 18 tpi fitting is A24-4 at $4.50; The 1/2 x 20 tpi fitting is A23-4 at $4.00.

Both of these fittings are for 1/4 line. They are not adapters. You simply re-flare your lines with these fitting in place of the originals. Please use a double flare only!.

Follow Ups:

• Adam, thanks for posting that info. ntxt - Paul (in NY) 16:24:13 12/31/2007
• What was the WEB site? - Will (in IL) 16:21:20 12/31/2007
  • Found it. fedhillusa.net ? - Will (in IL) 16:28:14 12/31/2007
• Re: Master Cylinder fittings. - Allen Patnode 16:02:37 12/31/2007
  • Re: Master Cylinder fittings. Here - Tom Petroff (IL) 16:38:00 12/31/2007
    • Thanks Tom, - Allen Patnode 16:39:46 12/31/2007
  • Re: Master Cylinder fittings. - Paul (in NY) 16:27:51 12/31/2007

Post a Followup