Posted by Rob Steller on July 11, 2000 at 23:15:06:
In Reply to: Warn Hubs posted by Jack Scott on July 10, 2000 at 13:06:57:
I've got Warns on two of my W-300's, which I have disassembled to lube and re seal. The engineering of the warns is very good, and I like that there are two O-ring seals between the outside and my wheel bearings (I run SAE 85W-140 gear oil in my hubs, not grease) I once got a set of selectros for my M-37, and sent them back, as the seals in them did not make contact, allowing water to run directly into the hub in fording situations. The engineering and fgabrication was lacking, in my opinion. I'd pay $400+ for Warns before $200 for anything else. Rob