Posted by Jackson Reimund on Wednesday, September 12, 2007 at 14:37:23 :
In Reply to: 10" verses 11 " clutch posted by Galen on Wednesday, September 12, 2007 at 11:57:48 :
Most 11" flywheels have the same starter ring gear as the 10" There is a low torque starter gear and ring gear out there just make sure that you have the right match. Count the teeth on the ring gear. Switch if needed. I prefer the more common standard gears rather than the hard to find low torque.
The 11" clutch is far better than the 10" Torque transfer is much smoother. I broke several axles in my M-37 with the 10" but in 25 years and the 11" no axle breakage. Peddle pressure and leg fatigue is less as well. It is much smoother and lasts far longer. Best single improvement you can do.
The best, Jackson
Follow Ups: