Posted by achiem37 on Thursday, August 02, 2007 at 09:13:37 :
In Reply to: oil pan gasket leaks posted by perry boquel on Wednesday, August 01, 2007 at 20:12:58 :
When I did my gasket I screwed in about 4 studs per side to hold the gasket in place. Just take some 5/16" bolts about 4" long and screw them in to the holes next to the ends and two across the middle ( oil pump ) area. This seems to hold them fine as when there lubed up with sealer they can slide. I used ULTRA BLUE and it worked great.Get enough bolts in and lightly snug them before replacing the studs with regular bolts.. Terry