Posted by George in Michigan on Tuesday, July 03, 2007 at 22:23:14 :
In Reply to: Re: more M-37 gas gauge woes.... posted by Steve Pellock on Tuesday, July 03, 2007 at 10:59:02 :
There are two stops on this sender that prevent the float from going higher. Both I guess, could be defeated, but then I think the low reading would be incorrect.
It also looks like the travel is exactly right, and it is the same as the sender that was originally in there that worked properly for awhile.
The other guage I put it showed an even more incorrect reading...which I guess proves these gauges are either not the same spec, or are subject to working incorrectly.