Posted by wet coast bruce on Sunday, April 22, 2007 at 16:06:23 :
and man did it work slick . I am surprised how easy it is to remove the bearings from the dana carrier without damage . One of the tricks I used was to capture a ball bearing under the main puller screw . By doing this the friction on the screw drops to almost nothing .
The design clamps the cup and cone together and pulls both halves off as a unit . If you own a tool company and want to patent the thing I am willing to share <ggg> Joe could use a kickback too . <ggg>
Bruce
darn happy bruce at that.
Follow Ups: