Posted by Vaughn on Monday, March 26, 2007 at 23:14:43 :
For those of you wanting to replace your cork seal with a neoprene oil seal, I found one that will work. CR 12723 (23mmx48mmx5mm) This is a metric seal that can be pushed into the housing with your fingers, fits tight in housing and around the shaft. You can also use the cork seal retainer with it as well. I have not installed one yet, but plan to in the near future. Even if your shaft and bushings are worn some, this seal should do a much better job at sealing in oil than cork.
Follow Ups: