Posted by Ken on Monday, March 12, 2007 at 19:47:50 :
In Reply to: spindle nut socket posted by Fleabag on Sunday, March 11, 2007 at 10:48:06 :
I made mine from (2) pieces of 14 Ga Sheet metal 2" wide. You can bend the metal in a vise with a hammer. I welded a big flat washer on one end and welded a spare lug nut onto the washer. This lets me use my lug wrench or the same 1 1/2" socket and breaker bar I used to remove the wheel.
Ken