Posted by Paul (in NY) on Friday, November 17, 2006 at 5:25PM :
In Reply to: Disc Brake Part Numbers posted by Joe J on Friday, November 17, 2006 at 4:45PM :
Here are the disk brake parts I used with the Helitool kits on my Bumblebee, Carryall, M37 and will use on the DevilBear;
All pat numbers are NAPA and prices were at my last purchase early this past summer
Left Caliper 242-2022 $ 16.99 + $23.00 Core
Right Caliper 242-2023 $16.99 + $23.00 Core
Rotors 4885677 $31.69
Caliper Pins 82205 $6.99 ( I do not think that was each, but for 8 ?
Brake Pads TS 728AM $13.69 for 4
I would suggest that this is the time to also replace all brake lines
The 'Y' Blocks with 23" of brake hose Wagner BH107281 $43.51 each
(2) 3/16" female holes on the Y end and on the hose end is a 3/16" Male the Y end has a 7/16:" hole to mount to differential
I also use Bendix 11584 Master Cylinder with both Vacuum and Hydroboost Boosters. This MC has a 1 & 5/16" bore. If you use a 1 & 1/4" bore MC you will have a low pdeal when opuched all the ways down as in a hard stop NAPA # 39017
Paul
Follow Ups: