Posted by bill b. on Sunday, November 12, 2006 at 9:32AM :
In Reply to: Re: wheel base posted by igor on Saturday, November 11, 2006 at 9:53PM :
was cut just behind the bed mount on both sides.From the weld point forward the frame is double,{1 inside another}from the weld back its a single frame. It also has a piece of steel plate bolted to the inside on both sides.It is close on square approx.1/8 inch difference to the front mount on the rear spring hanger.im measuring it all up before I change it im going to make it a swivel frame.