Posted by Kaegi on Sunday, November 05, 2006 at 2:03AM :
In Reply to: Bleeding Brakes posted by David Bizzell on Saturday, November 04, 2006 at 9:55PM :
sometimes it is hard to get all the air out of the master cyl. did you bench bleed it before installing? Waht I do is get underneath with wrench and safety glasses and crack the line loose at the master cyl. reach up and pull the brake pedal down, close line, let pedal up. About 6 or 7 times should get the air out of the master, then go back to the wheels