Posted by JD on March 23, 2000 at 01:47:26:
In Reply to: I've done all of that and the drums won't budge! posted by Chris Becker on March 22, 2000 at 22:51:50:
If you look close at the front of the drum, there is 2 thredded holes for 3/8-16 bolts tothred in. this acts as a puller to free the drums up. You will probably have to run a tap in to clean the threads up. Use a bottoming tap. apply preasure to the bolts evenly and tap the front of the drum. You are most likly a little frozen where the drum meets the hub. Use a little penatrating oil or wd-40 & soak. good luck, John