Posted by Steve Pellock on Friday, September 08, 2006 at 11:34AM :
In Reply to: Re: Hey Steve... posted by Kevin in Rehoboth on Friday, September 08, 2006 at 10:32AM :
I made them myself. The outside needs to be rabbited to be flush on the header and rear valance. You can cut the rabbits with a router but use a practice board for the outside until you get it right. I originally thought I could cut out an exact pattern of the contour of the bedsides with the strips attached and clamp it back a few inches on the wide board and use that as my router guide. You will find out it has to be modified somewhat larger around the wheel wells. It will be trial and error. Don't get things too tight. A litle gap around the bedstrips/angles will allow for expansion if the boards absorb moisture. I think I have a picture I can e-mail you.
Follow Ups: