Posted by Charlie on February 09, 2000 at 02:43:05:
In Reply to: 51 M37 Cvy. 350-SM465 CONVERSION posted by Todd Pease on February 08, 2000 at 23:44:22:
2 choices:
1) Convert transfer to Spicer 1350 yoke, commonly found in 1-3/8" 16 spline pattern. Also get same output yoke on SM465
2)"Morphadite" driveshaft: spicer 1350 on 465, get same splines as driveshaft piece (1-3/8") I have an all 1350 shaft on my M37 and a morphadite on my B1PW
there should be lots of room for either unless the motor is way back or unless you're using a Ranger overdrive, which I recommend with 4.89s and very highly recommend with 5.83s, unless you're using huge tires.
Charlie