Posted by mike stone Idaho (aka COTM) on Monday, June 12, 2006 at 3:30PM :
In Reply to: Re: 20" rim question posted by Kaegi on Monday, June 12, 2006 at 2:02PM :
I have no idea if all the 5 hole 20in budd
rims had those widths but those are the 30's & early 40's 20 in tire sizes
quick check is to measure from outside of
rim flange to inside rim flange & then take off about 1.75 to 2.25 for the flanges
that will give an approx wheel width
might also be stamped on the wheel somewhere
check area around the bolt holes for cracks