Posted by Vaughn on Saturday, May 27, 2006 at 11:36AM :
In Reply to: M37 to FFPW Question posted by Kaegi on Friday, May 26, 2006 at 10:50PM :
The PW rear spring eye will take the M37 spring eye bushing (same 1.002 O.D.); length has to be cut to 1-3/4. You will also need a six blade reamer to either ream out the I.D. or reverse the rotation of the reamer to spread/pack the bronze to accommodate the PW pin size. The M37 is slightly smaller I.D. than the PW. The best deal for PW pins is from www.partsamerica.com - SK4640. M37 and PW bronze bushings are about the same price, no advantage to buying the M37 bronze bushing. The M37 frame hanger bushing (1/2 Steel on ½ Bronze) is a good deal for the price (ebay) and can be used in the spring eye also following the same procedure.
Follow Ups: