Source of motor for plow...and a warning!


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by George in MI on Sunday, February 26, 2006 at 4:47PM :

In Reply to: Re: More on FFPW snowplow prob and... posted by Jerry Henry on Sunday, February 26, 2006 at 12:34PM :

Jerry, I got mine from Scientific Brake and Equipment Co in Gaylord Michigan. I live about 75 miles from these guys so I had it sent UPS. I got it in about 2 days. They are a good reliable source of info and parts. My motor was for a Meyer E-47.

Phone# 989 732 7507 or 800 292 3081
website www.scientificbrake.com

Here is the warning. It is very easy to remove the old one, just unscrew the two top bolts, remove the electrical feed and pull it off.

Putting it back on is just as easy IF you don't let this motor come apart. When shipped, there are two nuts on the bottom which are just there to hold it together. Once you take these off, it sort of wants to spring apart. The problem is if the top comes off to far, then the brushes fall out and it is a pain to put back together. I would suggest putting tape from the bottom up over the top to hold that in place. Then when you remove those bottom nuts, hold the unit together and put it in place, screw the long bolts into the housing and you are done. If this does come apart, as it did for me, let me know and I'll tell you how I got it back together.

George



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com