Posted by David Sherman on Friday, November 04, 2005 at 8:29PM :
In Reply to: Tiny posted by Gordon on Friday, November 04, 2005 at 3:51PM :
Okay, I got it cleaned out by filling the reservoir with acid and letting it work for a few hours (needed to get the rust out of the reservoir anyway). My smallest drill, #60, does not fit through the hole. The 4-th smallest torch tip cleaner is the largest one that will fit, and it's a rather loose fit. The 5-th smallest one is too big. The one that fits is supposedly for use with #68-#70 drill size holes. This is probably just pointless drivel. The only possible use would be if the hole was too clogged to push out with a wire, like mine was, and one actually HAD a #68 drill and a method for holding it in a chuck and turning it down inside the reservoir, perhaps with a pin vise. But that's the answer. I wonder why they made it so small.