Posted by Dana in Ma on Sunday, October 09, 2005 at 7:40AM :
I'm trying to figure out if the cab mount sizes I've used are correct on my C3. I've used a 1 3/4 inch in the front and a 2 inch in the rear mount. I think Vaughn gave me the spec. for them. Something doesn't look right to me. The rocker panels don't parallel the frame, or to be specific the running board mounting holes don't parallel the cab, the rear of the cab seems too high. Seems to me the running board brackets don't have too much lattitude up and down, therfore the the rockers on the cab should be parallel to the mounting holes? Of course I don't have any running board brackets to see if the holes are oblonged. Anyway I guess if I knew about how much distance there is supposed to be between the cab and the frame at the rear of the cab that would help me out very much and I could adjust accordinly. Getting the cab in the right spot is very important to me now because I'm fabricating pieces to attach the steering column for my power steering conversion. Thanks
Follow Ups: