And another busy day


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Ron in Indiana on Saturday, September 24, 2005 at 11:44PM :

Well Mike and I put in another good day on his truck. We installed a reseal kit on the rear axle and it needed it. Gear lube was brown goo, really nasty so we pulled the center section to clean out the slop. We then moved on to the front end and as we got deeper into the right front the inner bronze bushing was totally destroyed by whoever tried but failed miserably at installing one. We had to cut it with a sawzall to be able to pull it out. The tube was beat up but with a little die grinder help we got the new seal and bushing in. We also installed two new U joints in the drive shafts. We still need to do the left front axle seals, drop the oil pan to clean it out and bleed the brakes once more for good measure. We did finally get the running boards back on and the spare tire mounted too. One more good session and this Power-Wagon is ready for Windrock.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com