Posted by Will (in MI) on Tuesday, September 20, 2005 at 9:57PM :
Well, now that I have the Harmonic balancer repaired and on and the alternator mounted, I'm in need or new pulleys.
March makes a set, but they are under drive, and I'd rather have the higher water flow, faster alternator pulleys. I need a two grove crank and one grove water pump (I currently have the opposite and the water pump is slightly bent).
The Crank should measure approximately 1-7/16" to the first V-Grove Center from the Harmonic Balancer/Pulley flange.
The Water Pump should measure approximately 2-9/16" to the V-Grove center from the Water Pump to the Pulley flange.
Thanks,
Will