Posted by Andy (in MI) on Thursday, September 08, 2005 at 9:43PM :
In Reply to: Closeup of Vacuum Line posted by Todd Somers on Wednesday, September 07, 2005 at 10:20PM :
Thank you Spence, this is what I was looking for. I have two more questions though. What size steel line is that? Also, in this picture where the 90 deg elbow connects on the frame, is that just a union that takes a flare fitting and a NPT pipe thread or is that another type of metering valve? What I will have to do is re-run these lines on my truck because they have a vaccum hose running to the booster from the crankcase metering valve. And yes, my worst fear, they hooked up a road draft tube to the crank case; left it unfiltered and left the tube from the oil filler to the air filter on the carb. There is a plug in the rear port on my intake manifold so thats no problem to hook the booster back up there. Thanks again, Spence.
Follow Ups: