Posted by a p bloom on Saturday, August 27, 2005 at 11:14AM :
In Reply to: Broken Axel Shaft piece (in the center section) posted by Will (in MI) on Saturday, August 27, 2005 at 10:43AM :
Weld a short piece of threaded rod to the center of the broken piece. Pull on the rod with BMF pliers.
If that doesn't free it, put a big 1/2 inch drive socket over the rod, so that it straddles the bearing. Then run a nut and fender washer down on the threaded rod, and tighten it. It will draw the broken piece out.
COAPBINY