Posted by Will (in MI) on Monday, August 15, 2005 at 10:45PM :
In Reply to: Here's what I got... posted by chriscase on Monday, August 15, 2005 at 6:19PM :
5 on 6-7/8" (as published)
Center Hub Hole 4-16/16" (Hub was 4-7/8")
Lug Stud Hole 1.25"
Outer Diameter of the Chamfer 1.5" (Both front and back were chamfered)
Stud Diameter 3/4"
Wheel Plate 1/4" thick
I'm putting 1" of the extra 3.5" in wheel width into the offset, and the other 2.5" outboard. Looks line the brakes are 7.5" radius to the outer brake caliper surface, and the Budd Wheel is 15.5" inside diameter in that area, providing a 1/2" of clearance. Waiting on the 17" wheels dimensions, but expect it to have adequate clearance.
Will
Follow Ups: