Posted by Clint Dixon on Friday, August 12, 2005 at 12:59PM :
In Reply to: Non-Vent Window Doors and Regulators Wanted posted by dave horvath on Friday, August 12, 2005 at 12:11PM :
Dave, all of the POWER-WAGON doors that I have taken apart, that were originally non-vent window, still had the correct regulator to work with vent windows. The only door I have owned that was non-vent window, and with the different regulator, was an early W-series 2WD door that would not accept any of the rest of the vent window track hardware anyway. (This may not hold true on very early WDX doors though). The only difference I have found between the later W-series 2WD door, and the POWER-WAGON door, is the presence of the panel guard or track on the 2WD door that is spot welded to the door skin to keep the fiber door trim panel in place. These later 2WD doors that I have seen also have the factory drilled holes for the sheet metal screws to attach the POWER-WAGON metal door trim panel.
You may not want to limit yourself to POWER-WAGON only doors. I found that the panel guard from a 2WD door is easy to remove by drilling out the spot welds
Junior
Follow Ups: