Posted by chriscase on Thursday, July 28, 2005 at 1:21PM :
In Reply to: power steering/pitman arm quest. posted by jim in n.y. on Wednesday, July 27, 2005 at 8:06PM :
I did my own conversion on a 1/2 t CC, the box was far enough to the left that I had to bend the clutch pedal to make room for the column- but I used a modern column and the stock rag joint too. I wanted a very stock look. I also had to mount the column 2 inchs to the left at the dash to aline it- the stock one was crooked and not aligned with the driver, as many cars are done.
Follow Ups: