Posted by Bert Wilson on November 07, 1999 at 18:41:08:
In Reply to: Tow bars and PW's? posted by Tim on November 07, 1999 at 02:13:33:
Tim, I learned the hard way on this. After you get the tow bar mounted solid to the front bumper (I welded heavy angle iron on to the bumpers and bolted the tow bar to them), you can cut them off and grind them smooth later. Tie off the steering wheel with a rope so it can't go to lock in either direction. Otherwise on a sharp turn a PW may turn all the way to lock and drag and/or break the tow bar. Another way would be to put someone in the PW to steer it thru the sharp turns. Good luck and be careful, Bert