Posted by Jim Murdock on October 24, 1999 at 08:37:25:
In Reply to: "DODGE" NAMEPLATE posted by Don on October 24, 1999 at 08:03:50:
Don, That's a real problem....if you can loosen
the respective bolts that hold the radiator frame
on enough to reach under the cap from the front of
the radiator then you have access but it is easier
to disassemble the whole front end to gain access.
I've done it both ways, just remember in the end
that you'll need access again to reinstall the
same nameplate. good luck, Jim