Posted by Mike in Connecticut on Wednesday, June 01, 2005 at 9:23AM :
In Reply to: part time conversion on full time m880 dana 44 posted by tim on Tuesday, May 31, 2005 at 8:06PM :
Tim:
I can't help on the conversion question, I have never done it. Been running the fulltime set-up for 15+ years without trouble. I have done a couple of front bearings when the rotors needed to be replaced and that nut can be TIGHT. I use a 3/4 inch drive breaker bar with the handle from my floor jack for added leverage and it came off okay.
Good Luck, Mike