Posted by Willy-N on Wednesday, January 26, 2005 at 9:04PM :
In Reply to: Re: Pictures of the M37 Skid plates posted by Vaughn on Wednesday, January 26, 2005 at 8:52PM :
Thanks isn't that why we have them? I am adding a 6 inch bolt on angled lip on the front of the center one with a cut out for the drive shaft to go up and down in. This way I can just un-bolt it to access the fill plugs ect above the plate. I think that should be good for what I will do with it. I will add a 1/8" plate under the Gas Tank for flying rocks but not made to suport the truck on. It sits 22 inches off the ground anyways. Wanted to protect the Exsaust but then it could collect grass and start a fire, best to leave it open. Might put a extra strong mount off the pipe it to keep it from tearing it off my manifold if the Muffler snags a rock some day. The Muffler is not welded on so I hope it comes off if that happens. Mark H.
Follow Ups: