Posted by Dave Hackney on September 20, 1999 at 16:30:37:
In Reply to: difference between the 413 and the 426 posted by Garrett on September 20, 1999 at 12:51:18:
I had a 413 in a 66 W200 was a fine engine. If you are putting a motor in while it was out I would replace the heads (452's) and put on a later model intake. The car engine cam will make a reasonable pickup cam, was made to haul around a 6000 lb car at lower engine speeds. Remember other then pistons and rings all the parts you need are from a 440. Do not let the 413 go for little or nothing. It has the steel crank people like for there 440's.