Snowplow

Posted by Northern Calif Dave on Thursday, October 07, 2004 at 4:37PM :

I have to custom design a steel snowplow pump frame assembly to allow access to the MU-2 winch, and I don't have a modern pump yet?

A. Is there a standard height required for a snowplow pump?

B. Anyone have a source for a 160 Amp alternator to fit on the 230 L6 for a '48 B-1.

C. Does anyone have a good design they have used? I was thinking of using 1x3 rectangular tubing if I can get it to bend well enough.

D. Does the Snowplow frame assembly really need to be angle braced back to the radiator support in which case it can interfere with the winch de-clutch handle, or is it sufficient to just mount it to the bumper/frame?

Thanks.

Follow Ups:

• Re: Snowplow - JimmieD 5:19PM 10/07/2004
  • Re: Snowplow - Northern Calif Dave 5:55PM 10/07/2004
    • Re: Snowplow - Ken C. 6:01PM 10/07/2004
      • Re: Snowplow - Northern Calif Dave 7:12PM 10/07/2004
      • Re: Snowplow - Northern Calif Dave 6:04PM 10/07/2004
        • Re: Snowplow - Dave Speed 6:15PM 10/07/2004
• Re: Snowplow - Ken C. 4:59PM 10/07/2004
  • Re: Snowplow - George (AB) 2:17AM 10/08/2004
    • Re: Snowplow - Ken C. 8:56AM 10/08/2004

Post a Followup