Re: Wanted Chrysler 360 Engine

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by John S on Wednesday, September 22, 2004 at 6:35PM :

In Reply to: Wanted Chrysler 360 Engine posted by Paul(in NY) on Wednesday, September 22, 2004 at 10:37AM :

Watch those engines that were used with automatic transmissions. The cranks are not always drilled for the pilot bearing. You can drill the crank out yourself. As for the flywheel the 360's are drilled for external balance.The 360 flywheels are a bit more difficult to locate. I have the mopar drawing that gives the balance hole locations and drill specs. A 318 flywheel can be drilled for balance if a orginal 360 flywheel can't be located. I swapped a 360 into my 68w100 the donor engine was from a standard transmission truck.

Follow Ups:

So John, the 1994 360... - Will (in MI) 8:48PM 09/22/2004

Re: So John, the 1994 360... - John S 9:42PM 09/22/2004
- Thanks ntxt - Will (in MI) 9:47PM 09/22/2004

John, Thanks for the info ntxt - Paul(in NY) 6:52PM 09/22/2004

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com